MINI MECHANICAL DOCK LEVELER – MiniMDLND
Mini Mechanical Dock Leveler – MiniMDLND is solidly designed by stainless steel, operating with the thrust of spring to lift and lower. Support for safe, efficient, and high productivity of goods from warehouse to the vehicle’s trunk (and vice versa).
The Mini Mechanical Dock Leveler is not normally installed in a pit, but installed rather on a loading platform with easy operation. Mini Dock is used in the event that the difference between the warehouse floor and the truck floor is low. Used for import and export areas, loading and unloading goods in docks, warehouses, or manufacturing plants.
ADVANTAGES
Simple structure: Easy to use, clean, and reduce maintenance costs.
The material can withstand fluctuations of external environmental conditions.
MiniMDLND is usually not installed in the pit but installed on the loading platform, does not use electricity to operate, saving time and cost.
Safety lock valve, control the lifting and lowering movement, limit risk during control.
Produced according to European technology standards. Helping the factory to meet the safety standards in production operations: ISO 14000, ISO 45001: 2018, ROHS, HACCP, GMP..
| Load capacity | 4000kg – 6000kg |
| Raising/Lowering range | + (-) 100mm |
| Floor surface material | Anti-slip ribbed steel plate |
| Lip thinkness | 12 – 16mm |
| Platform thinkness | 6mm – 8mm |
| Number of springs | 2 |
| Painting thickness | 60 – 90 micron |
| Temperature range | -30oC – +50oC |
INSTALLATION
| Model | Dimension (mm) | Raising/lowering range (mm) | ||||
| MW | ML | MLL | MF | Raising | Lowering | |
| MiniMDLND04501635 | 1600 | 500 | 300 | 800 | +100 | -100 |
| MiniMDLND04501835 | 1800 | 500 | 300 | 800 | +100 | -100 |
| MiniMDLND04502035 | 2000 | 500 | 300 | 800 | +100 | -100 |
| MiniMDLND04502235 | 2200 | 500 | 300 | 800 | +100 | -100 |
MW: Floor width, MLL: Length of the lip, ML: Length of the Dock floor, MF: Length of Dock (lip open) | ||||||
OPERATION INSTRUCTIONS
01/ Insert the lever attached to the platform pull position to pull the platform.
02/ Pull the lever backward to raise the platform to the highest position.
03/ Once the lip is higher than the vehicle bed, release the lever and pull it slowly forward so that the lip rests on the vehicle bed.
04/ Pull out the lever and carry out the loading and unloading of goods.
PHOTO REALISTIC
OTHER PIECES OF INFORMATION
WORKING PROCESS
Go through 6 key steps: Receiving orders ⇒ Giving information to production departments ⇒ Manufacturing operations ⇒ Products quality checking ⇒ Products packaging ⇒ Delivering to customers.
PRODUCTS PACKAGING
Products are manufacture, perfect, and strictly tested to quality standards before being packed and handed over. Meet the standards of each type of transportation as well as facilitate the storage process.
CERTIFICATION
All products at Navidock are manufactured to meet European technology standards. Specifically, Navidock has achieved quality certificates such as ISO 9001: 2015, CE 2006/42 / CE...
DISTRIBUTION AREA
Navidock has been building up a nationwide distribution network. Besides, also boosting exports to countries in Southeast Asia such as Cambodia, Laos, Myanmar, Thailand, Malaysia, Indonesia, and other free trade partner countries.
TYPICAL CUSTOMERS
Through a long period of cooperation and association, Navidock has gained the absolute trust of many partners and customers nationwide through reputation, quality, and professionalism.
Navidock – Manufacturer and supplier of lifting solutions and conveying systems for goods & vehicles:
Dock leveller – Mobile Ramp – Dock Seal – Dock shelter – Dock Plates – Dock Boards – Dock House – Loading Bay
Website : www.navidock.vn
KIen –
MINI MECHANICAL DOCK LEVELER (MINIMDL)