HYDRAULIC TELESCOPIC LIP DOCK LEVELER – HDLTND
Hydraulic Telescopic Lip Dock leveler – HDLTND is a connection device between the container floor or different vehicle with the floor of the warehouse / receiving area. Support the circulation of goods from the warehouse to the vehicle’s trunk (and vice versa) safely, effectively and with high productivity, shortening time and saving costs for businesses.
It is a solidly designed type with high-strength steel. HDLTND combines with Overhead Doors to create a closed import and export space, reducing the risk of insects entering and heat loss. HDLTND helps to reduce the risk of falling, damaged goods when goods are loaded close to the door of the vehicle’s trunk (compared to when using a line Dock Lip turn on). However, when folded, HDLTND is not completely sealed, with high maintenance costs.


ADVANTAGES
The material can withstand fluctuations of external environmental conditions.
Stainless steel material is resistant to abrasion, the surface of the steel plate helps prevent slipping.
Sturdy design with Lip slide helps to smoothly lift and lower the process and overcome the difference between the Dock and the vehicle’s trunk.
reduce the risk of dumping goods when loading the goods near the vehicle’s trunk (compared to when using a line Dock Lip turn on).
Combined with Overhead doors to create a closed loading and unloading space, reducing the risk of insects entering and heat loss.
Safety lock valve, control the lifting and lowering movement, limit risk during control.
Produced according to European technology standards. Helping the factory to meet the safety standards in production operations: ISO 14000, ISO 45001: 2018, ROHS, HACCP, GMP…


Load capacity | 6000kg / 10000kg |
Raising/lowering range | ±300m |
Plat Thicknesss | 6 – 8mm |
Lip Thickness | 12 – 16mm |
Number of lifting cylinders | 1 – 2 |
Power motor | 0.75 – 1.1kW |
Power supply | 380V / 3 phase / 50Hz |
Control cabinet | IP54 protection against dust and water, equipped with emergency stop and push button |
Painting Thinkness | 60 – 90 micron |
Temperature range | -30°C – +50°C |
INSTALLATION
Model | Lifting Platform Dimension (mm) | Pit Dimension (mm) | Lip lift/lowering range (mm) | ||||||
DW | DL | DH | Lip | PW | PL | PH | Raising | Lowering | |
HDL-S106ND20186 | 1800 | 2000 | 600 | 400 | 1840 | 2010 | 610 | +300 | -300 |
HDL-S106ND25186 | 1800 | 2500 | 600 | 400 | 1840 | 2510 | 610 | +300 | -300 |
HDL-S106ND20206 | 2000 | 2000 | 600 | 400 | 2040 | 2010 | 610 | +300 | -300 |
HDL-S106ND20256 | 2000 | 2500 | 600 | 300 | 2040 | 2510 | 610 | +300 | -300 |
HDL-S106ND20306 | 2000 | 3000 | 600 | 400 | 2040 | 3010 | 610 | +300 | -300 |
DW: Dock width, DH: Dock height, DL: Dock length excluded, PW: Pit width, PH: Pit height, PL: Pit length |

Step 1: Build and complete the Dock pit
Build and complete the Dock pit in accordance with the selected Dock size. Iron frame V around the edge of the pit.


Step 2: Put the Dock in the installation position
Use a forklift or crane to put the Dock into the Dock pit. Depending on the mounting terrain, the Dock can be placed either vertically or horizontally.
Step 3: Welding to connect the Dock to the pit.
Weld the dock frame edge to the V-panel of the Dock pit. Check for sure welds and ensure aesthetics. Check for vibration and safety while operating the Dock.

OPERATION INSTRUCTIONS
01/ Press and hold down ON button until Lip opens fully.
02/ Release ON button so that the platform and lip lower and reach the vehicle bed.
03/ Carry out the loading/unloading of goods.
04/ Press and hold down ON button until the platform is fully raised.
05/ Release ON button and lip automatically closes and the platform goes down fully, end the working process.
Navidock – Manufacturer and supplier of lifting solutions and conveying systems for goods & vehicles:
Dock leveller – Mobile Ramp – Dock Seal – Dock shelter – Dock Plates – Dock Boards – Dock House – Loading Bay
Website : www.navidock.vn
Reviews
There are no reviews yet.