CAR LIFT TABLE – SLTND
Car Lift Table – SLTND is an indispensable device in the warehouse during the lifting process for automobile assembly factories and large machines with hydraulic technology. With diverse lifting loads, depending on intended use with a sturdy X-structure
SLTND has features such as large lifting capacity, wide lift tabletop, and high bearing capacity. The maximum lifting height is about 6 meters, so it is also used in many workshops with many floors


ADVANTAGES
The structure includes high-strength stainless steel, suitable for all types of weather, ensuring long-term stable operation.
The product has a safety valve system and safety signals are indicated by a sticker on the device, making the operation safe.
Easy to use, install and maintain, maximum cost savings for businesses.
The car lift table has a load capacity of up to 6000 kg.
The system of safety valves and safety signals are announced by the stickers on the device, making the operation safe.
Produced according to European technology standards. Helping the factory to meet the safety standards in production operations: ISO 14000, ISO 45001: 2018, ROHS, HACCP, GMP…

Load capacity | 1000kg / 5000kg / (ATCR*) |
Length | 1200 – 4800 (mm) / (ATCR*) |
Width | 800 – 2400 (mm) / (ATCR*) |
Max. height | 1050 – 3600 (mm) |
Min. height | 250 – 720 (mm) |
Raising/Lowering stroke | 800 – 2880 (mm) / (ATCR*) |
Raising/lowering speed | 6 / 8 / 10 (m/ph) |
Capacity | 0.75 – 3Kw |
Power supply | 380V / 3 Phase / 50Hz |
Material | Steel |
Control mode | Press Button |
Working temperature range | -35°C … +50°C |
Operation principle | Hydraulic lift table lifts and lowers under action of hydraulic cylinders |
INSTALLATION PROCESS
1.Construction and completion of the car lift table pit.
Construct and complete the pit to suit the size of the selected car lift table. Iron frame V around the edge of the hole. Construction of power lines running in the background.

2.Put the car lift table in the installation position
Use a forklift or crane to bring the floor into the pit. Need to put the lift table vertically. Then check and prepare power lines. Be careful to place them in the appropriate position to connect to the lift table.
3.Welding to connect the car lift table to the pit.
Welded the table leg into the iron frame. Check for sure welds and ensure aesthetics. Then, check the vibration and safety while operating the lift table.

OPERATION INSTRUCTIONS
01/ Place goods neatly on the platform area of the lift table.
02/ Press and hold “UP” button to raise the platform, once it reaches the desired height, release the button to stop. Move the goods to the desired place.
03/ Press and hold “DN” button to lower the platform, once it is lowered fully, release the button to stop.
Navidock – Manufacturer and supplier of lifting solutions and conveying systems for goods & vehicles:
Dock leveller – Mobile Ramp – Dock Seal – Dock shelter – Dock Plates – Dock Boards – Dock House – Loading Bay
Website : www.navidock.vn
Vietadmin –
CAR LIFT TABLE