Loading bay is a system of solutions to support and control import and export activities, for areas with means of transporting goods, frequent import and export activities such as industrial parks, commercial buildings, warehouses. Large-scale goods such as logistics warehouse (warehouse), raw material warehouse, finished product warehouse, logistics center.
The design of a flight loading system will depend on many factors such as architectural requirements, aesthetics, performance, economic efficiency calculation to choose the appropriate design. Typically, a flight loading system can be designed with three main types: Loading Dock completely outside, Loading Dock flush part of the warehouse and fully enclosed warehouse. And the third more modern type is a fully enclosed warehouse.
Sàn nâng này được xem như cầu nối giữa sàn dock và xe tải, giúp tăng hiệu suất xuất nhập hàng, giảm thời gian xuống 10-12 phút/xe container. Dock leveler có thể được vận hành thông qua hệ thống cơ khí và hệ thống thủy lực. Sàn nâng Forklip được ứng dụng nhiều trong ware house, kho nguyên liệu, kho logistics.
The product is made of high-strength steel material, diverse loads from 6-10 tons, meeting large cargo volume through hydraulic pump system or mechanical system.
Principle of operation of the Dock leveler:
Keep pressing the ON button until Lip opens completely.
Release the ON button to floor, the lower lip touches the floor of the vehicle.
Proceed to the loading and unloading process.
Hold down the ON button until the floor is fully raised.
Release the ON Lip button itself and the floor goes down completely, ending the process.
1. Construction and completion of dock pits
Build and complete the Dock pit in accordance with the selected Dock size. Iron frame V around the edge of the pit. Construction of underground electrical systems (For hydraulic dock leveler)
2. Put the dock in the installation location
Use a forklift or crane truck to bring the Dock into the Dock pit. Depending on the mounting terrain, it is possible to put the Dock vertically or horizontally.
For Hydraulic Dock, test and prepare power lines and put them in the proper position to connect to the Dock.
3. Linking Vertical to the Dock pit
Solder the edge of the dock to the V-slot of the Dock. Checking welds firmly and ensuring aesthetics. Check vibration and safety when operating.
(part of the process of drawing a frame, please tell Ms. Bao, the left frame is for text like picture, the right frame is for inserting picture)
2. Dock house
Dock house buffer room is a solution to control the temperature, humidity in the warehouse, as well as control insects. In addition, this solution is also a solution that helps to prevent dirt from the external environment from entering the warehouse.
Dock house is also a place to gather goods, covered on the Dock leveler, to help protect the dock leveler, combined with other import and export systems to increase the efficiency of goods import and export, minimize the impact of time conditions secretion, prevent heat loss, prevent insects and dirt. Dock house solutions are used in many industries such as food processing, manufacturing machinery, electronic components, … applications in logistics warehouses with internal floor area limited.
– Structure of dock house: Dock houses have a structure of solid steel frame, safe positioning for users. Partitions made of aluminum, panel, … have heat resistance, good strength.
3. Dock Shelter
Dock Shelter awnings made of synthetic fabric material will have high mechanical strength, heat resistance and good water resistance. When the transport vehicle enters the import and export position, the shelter cover tarpaulin covers the rear of the vehicle, connecting the trunk and the store door to prevent loss of cold air, moisture, dust and the penetration of insects from outside. Dock Shelter is used in logistics, material storage and logistics.
4. Loading dock door
Dock door is an indispensable part in the dock area. Dock doors are usually fast rolling doors or ceiling sliding doors. This type of door has the ability to control humidity, insulation, prevent dust, prevent insects and automate each specific need to ensure cost savings and safe operation.
Import and export door High Speed Door
High Speed Door DOORS High Speed Door is an industrial door intelligent, versatile, stable operation, absolute safety, high aesthetics.
Naviflex fast shutter door is a series of doors manufactured to increase the ability to open and close, smart sensors when people and vehicles move closer, preventing dust, insects, insulation, … high efficiency. The product is applied in raw material warehouse, logistic warehouse or other areas where special environmental and hygiene conditions need to be maintained such as industrial clean rooms, pharmaceutical industry buildings; food handling area, or factory clean room.
– Structure of fast shutter (hình ảnh thông số)
– Principle of fast shutter door operation
– Installation instructions
– Product selection criteria
Overhead Door Import and Export Door
Ceiling sliding doors are resistant to wind, dust, and good insulation, often used as a door for import and export (the door connecting the warehouse and the outside environment).
– Structure of skylights includes: Door frame, door body, bottom bar, spring system
OverHead Door body is assembled by 2 layers of super-strong steel, in the middle of the two layers of steel is a PU foam layer with a thickness of 40mm, which provides good soundproofing, thermal insulation and impact resistance.
Bottom bar the door is made of 2 metal bars that help seal the surface after the door is completely closed.
Torsion springs system around the transmission bar helps balance the weight of the door body and reduce the weight of the engine load
– Principle of operation: Operate under the mechanism of sliding ceiling without rolling lot with 3 sliding mechanisms: vertical, perpendicular and oblique.
– Installation instructions
– Product selection criteria
Interlock in particular in the field of access control – the access control system is to prevent the simultaneous opening between the dock leveler and the door of entry and exit (sliding doors overhead door or high speed rolling shutter door) door) in a controlled area. The system allows the opening of the door for import and export of goods to open the dock, and when closed, the dock will close first, then the door can be closed.
Anatomy of an interlock system
A basic interlock system includes: – The controller can be either a central unit or a card reader – Card reader, fingerprint – Electronic lock …
6. Traffic light
The light shows red and yellow light to illuminate and support during the import and export process in the evening.
7. Wheel Guide
Wheel guide bar helps the truck to enter the position of import and export correctly. The Wheel Guide is usually painted in striking yellow for easy identification.
Rubber shock absorbers are attached to the warehouse door to reduce collisions with trucks and forklifts.
Free surveys and advice
For more information on the solution LOADING BAY and other smart import and export solutions, contact us immediately Hotline: 0938 82 82 42